An important element in the calorimetry simulation is the ability to save the time versus temperature data from a calorimetric experiment to the lab book and later copy that data to an external spreadsheet program for further analysis. This is done by clicking on any of the Save buttons on the Live Data tab. This, in turn, will create a link in the electronic lab book where all the time versus temperature data will be saved as the calorimetric experiment proceeds. The saving process will continue automatically until the Save button (now labeled Stop) is clicked again. This data can be selected, copied, and then pasted into an external spreadsheet program for further analysis. Note that the Acceleration button governs the density of points saved to the lab book. At normal laboratory time, the data rate is approximately one point per second. When laboratory time is accelerated, the data rate will be approximately one point per 5 seconds. During the course of the experiment, time acceleration can be adjusted as necessary to increase or decrease the density of points saved in the lab book.